Priority Watch Operation - Icom IC-3SAT Instruction Manual

9-2 Priority watch operation
1) Set the memory channel
VFO — MEMORY CHANNEL | to be watched.
| 2) Push [A] to select VFO
. mode.
VFO S CALL CHANNEL Push [D] to call up call
channel.
1) Push [B] to select
MEMORY mode.
VFO <> MEMORY SCAN 2) Push and hold [*] or
` [X] to start memory
scan.
PRIORITY WATCH 9
"S |
Refer to the following table for any priority watch opera-
tion. However, before operating the watch function, rotate.
[SQUELCH] clockwise until audio is muted.
e Priority watch
pauses for 15
sec. when a
While push- signal is received | eWhile pushing [F],
ing [F], push on a watching push [7].
[7]. channel or e[A], [B] or [D]
resumes 2 sec. also stops the watch
after the signal | function. However,
disappears. the mode may be
e While the watch changed.
pauses, pushing
[A] resumes
watch manually.