Icom IC-3SAT Instruction Manual page 14

Д. PANEL DESCRIPTION
4-2 Keyboard
со
е When selecting VFO mode: Enter
the digit for the operating frequency.
(p. 14)
e When selecting MEMORY mode:
Select the memory channel in the
same 10-digit channels. (p. 20)
eWhen selecting ОТМЕ MEMORY
mode: Select the DTMF memory
channel. (p. 29)
e When transmitting: Transmit DTMF
Turns ON and OFF an optional subaudible tone encoder or
tone squelch function. (p. 41)
Turns ON and OFF an optional pager or code squelch
| function. (pgs. 38 ~ 40)
When selecting MEMORY mode: Programs the memory
channel as the skip channel. (p. 26)
Programs an optional code memory for pager and code
squelch functions. (p. 37)
When selecting MEMORY mode:
Masks (makes blank) the memory channel. (p. 21]
Starts priority watch (p. 28).
e When selecting VFO mode: Enters SET mode. (p. 8)
e When selecting DTMF MEMORY mode: Programs DTMF
code. (p. 29)
e When selecting CLOCK mode: Programs clock or timer
time. (p. 30)
e When selecting MEMORY mode or the call channel:
No function.
Enters CLOCK mode. (p. 30)
Selects a dial select step. (p. 15)