Icom IC-3SAT Instruction Manual page 29

изме SET MODE — —
ll FREQUENCY SKIP FUNCTION ON/OFF
Skip function is ON. | Skip function is OFF.
1) Push [A] (CLR) to select VFO mode.
2) While pushing [F], push [8] (SET) to enter SET
mode.
e Refer to p. 8 for SET mode details.
3) Push [*x](v) or [#] (A) until "PS" appears as
shown above. |
4) Rotate the tuning control to turn ON or OFF the
frequency skip function.
_ 5) Push [A] (CLR) to exit SET mode.
SCAN OPERATION 8 |
!
Memory channels not desired can be skipped during me-
mory scan. These skip channels are also skipped during
priority watch (memory scan watch) and the frequencies of
the channels are skipped during full or programmed scan.
In a memory channel. Shows the skip channel.
1) Select the memory channel to be programmed as the
skip channel:
- Push [B] (MR) then rotate the tuning control, or push
[B] several times then push a digit key.
2) While pushing [Е], push [3] (SKIP) to program.
e "SKIP" appears.
3) Repeat step 2 to delete the skip function from the
memory channel.
26