Icom IC-3SAT Instruction Manual page 41

OPTIONAL UNIT OPERATION 13
!
| Bl PERSONAL CALL
PRE-PROGRAM СО: ID code of "222" PRE-PROGRAM СО: ID code of ''111"
| C1: Station B's ID code of '222
1) While pushing [F], push [2] (PGR/C-SQL)
to turn ON the pager function.
1) While pushing [F], push [2] (PGR/C-SOL)
to turn ON the pager function.
While pushing [F], push [5] (CODE).
3) Rotate the tuning control to select the
channel with the programmed ID code of
Station B.
Push [PTT] to return to the normal
display.
5) Push [PTT] to transmit the ID code of
Station B.
When receiving a signal, the display
becomes the code channel CP that shows
the ID code of Station B. The transceiver
emits beeps.
Push [PTT]. |
8) While pushing [F], push [2](PGR/C-SOL) to
select the code squelch function, or push [2] again
to turn OFF the pager function. |
9) Operate the transceiver for normal communications. | 5) Operate the transceiver for normal communications. |
2) When receiving a signal, the display shows
the code channel CP that indicates the ID
code of Station A. The transceiver emits
beeps.
3) Push [PTT].
4) While pushing [F], push [2] (PGR/C-SQL) to select
the code squelch function, or push [2] again to turn
OFF the pager function.
38