Icom IC-3SAT Instruction Manual page 42

39
13 OPTIONAL UNIT OPERATION
li GROUP CALL
While pushing [F],
push [5] (CODE).
3) Rotate the tuning
control to select the
channel programmed
with the group code.
Push [РТТ]
display.
5) Push [PTT] to transmit the group code.
to return to the normal | 2) When receiving a
signal, the display
shows the code chan-
nel programmed
with the group code.
The transceiver
emits beeps.
Push [PTT].
4) While pushing [F], push [2] (PGR/
C-SQL) to select the code squelch func-
tion, or push [2] again to turn OFF the
. pager function. |
When receiving a
signal, the display
shows the code chan-
nel programmed
with the group code.
The transceiver
emits beeps.
6) When receiving a signal, the display The transceiver emits beeps.
shows the code channel programmed
with the group code. The transceiver
emits beeps.
Push [PTT].
8) While pushing [Е], push [2] (PGR/
C-SQL) to select the code squelch func-
tion, or push [2] again to turn OFF the
pager function.
Push [PTT]. |
5) While pushing [F], push [2] (PGR/
C-SOL) to select the code squelch func-
поп, or push [2] again to turn OFF the
pager function. |
Operate the transceiver for normal com-
munications.
Operate the transceiver for normal com-
munications.
Operate the transceiver for normal com-
munications.