Icom IC-3SAT Instruction Manual page 23

(2) USING THE KEYBOARD
1) Push [B] (MR) several times to select the desired 10-digit
memory channels.
2) Push the appropriate digit key to select the memory
channel.
e Pushing [=] (v) and [#] (^) also allows you to select
memory channels.
|
3) Push [A] (CLR) to return to VFO mode.
EXAMPLE: Selecting memory channel 3b using the keyboard.
MR/MW
Push keys
Display
EXAMPLE: Writing 223.68 MHz into memory channel 40.
Св) Св) CoD
Push keys |
Display
!
6-2 Writing a memory
1) Select the memory channel to be programmed.
e See Section 6-1 for details.
2) Push [A] (CLR) to select VFO mode.
3) Set the frequency (and duplex when required).
4) While pushing [F], push and hold [B] (MR/MW) until
the transceiver emits 3 beeps. |
5) Thea memory has been written into the memory channel.
To check the contents, push [B] (MR).
MR/MW MR/MW
Push and hold
(F) +5 чему