Icom IC-3SAT Instruction Manual page 27

8-2 Scan operation
Push [A] to select
VFO mode.
PROGRAM- | Push [A] to select
MED SCAN | VFO mode.
MEMORY Push [B] to select
SCAN MEMORY mode.
Push and hold
[+] or [#] for 1
sec.
While pushing [F]
push [+] or [#].
Push and hold
[+] or [£z] for 1
Sec.
!
SCAN OPERATION Ө
Refer to the following table for any scan operation.
However, before operating a scan, rotate the [SOUELCH]
control clockwise until audio is muted.
ә Scan resumes 10 sec. after
a signal is received or 2 sec.
after a signal resumes.
e Tuning control rotation
restarts scan and changes
scan direction.
e Resume condition can be
selected. See p. 25 for
details.
ePush [+] or
[ #1.
ө [А], [B] or
[D] also stop
the scan,
though the
operating
mode may be
changed.
Blinks when frequency.
skip is ON.
Blinks when frequency
skip is ON.