Icom IC-3SAT Instruction Manual page 18

P) BASIC OPERATION
STEP
using SET MODE
Ei SETTING A TUNING STEP
The display shows the
tuning step for 20 kHz.
1) Push [A] (CLR) to select VFO mode.
2) While pushing [F], push [8] (SET) to enter SET
mode.
e Refer to p. 8 for SET mode details.
4) Rotate the tuning control to select the desired
tuning step.
5) Push [A] (CLR) to exit SET mode.
While pushing [F], the tuning control changes the fre-
quency in the following quick step.
(Е) + 25
Memory channel
100 kHz
1MHz
` While pushing [F], push [0] (DIAL SEL) to select the dial
select step.
e Each push of the switches changes the step.
(4) LOCK FUNCTION
The lock function electronically locks the tuning control
and keyboard to prevent the M eguengy from changing
accidentally. |
1) While pushing [Е], push [D] (CALL/LOCK) to turn ON
the lock function.
2) Repeat step 1 to turn OFF the function.