Icom IC-3SAT Instruction Manual page 15

eWhen selecting VFO or MEMORY
mode: Change the operating fre-
quency or.memory channel.
(pgs. 14, 20).
To start full scan or memory scan,
push and hold either key. (p. 24)
e When selecting SET or CLOCK mode:
Change the display contents.
(pgs. 8, 30)
eWhen selecting DTMF MEMORY
mode: No function.
e When selecting VFO mode:
Clears input digit before entry.
(p. 14)
e When selecting MEMORY mode or
the call channel: Returns to VFO
mode.
e When selecting VFO mode:
Selects MEMORY mode. (p. 19)
e When selecting MEMORY mode:
Changes the channel in 10 digits. (p. 20)
PANEL DESCRIPTION 4
When selecting VFO mode: Start programmes scan.
(p. 24)
When selecting MEMORY mode or call channel: Transfers.
the contents into VFO mode by PS and holding.
(pgs. 21, 22)
e When selecting VFO mode: Writes the VFO contents into
the memory channel by pushing and holding. (p. 20)
e When selecting the call channel: Writes the VFO contents
into the call channel by pushing and holding. (p. 22)
CALL/LOCK
Selects the call channel. (p. 22) Turns ON the lock function. (p. 15)