D-Link TM DES-6500 Cli Manual page 90

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show stp instance_id
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DES-6500:4#show stp instance_id 0
Command: show stp instance_id 0
STP Instance Settings
---------------------------
Instance Type
Instance Status
Instance Priority
STP Instance Operational Status
--------------------------------
Designated Root Bridge : 32766/00-90-27-39-78-E2
External Root Cost
Regional Root Bridge
Internal Root Cost
Designated Bridge
Root Port
Max Age
Forward Delay
Last Topology Change
Topology Changes Count : 2987
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp mst_config_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MSTP configuration identification currently set on the Switch:
configuration for the CIST internally set on the Switch.
None.
: CIST
: Enabled
: 32768(bridge priority : 32768, sys ID ext : 0 )
: 200012
: 32768/00-53-13-1A-33-24
: 0
: 32768/00-50-BA-71-20-D6
: 1:1
: 20
: 15
: 856
Used to display the MSTP configuration identification.
show stp mst_config_id
This command displays the Switch's current MSTP configuration
identification.
None.
None.
87