D-Link TM DES-6500 Cli Manual page 43

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To display the current name of the SNMP engine on the Switch:
DES-6500:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DES-6500:4#
create snmp group
Purpose
Syntax
Description
Parameters
Used to create a new SNMP group, or a table that maps SNMP
users to SNMP views.
create snmp group <groupname 32> [v1 | v2c | v3
[noauth_nopriv | auth_nopriv | auth_priv]] {read_view
<view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
The create snmp group command creates a new SNMP group,
or a table that maps SNMP users to SNMP views.
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group the new SNMP user will be
associated with.
v1 – Specifies that SNMP version 1 will be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and
control network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP
v2c supports both centralized and distributed network
management strategies. It includes improvements in the Structure
of Management Information (SMI) and adds some security
features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
Message integrity − Ensures that packets have not been
tampered with during transit.
Authentication − Determines if an SNMP message is from
a valid source.
Encryption − Scrambles the contents of messages to
prevent it being viewed by an unauthorized source.
noauth_nopriv − Specifies that there will be no authorization and
no encryption of packets sent between the Switch and a remote
SNMP manager.
auth_nopriv − Specifies that authorization will be required, but
there will be no encryption of packets sent between the Switch
and a remote SNMP manager.
auth_priv − Specifies that authorization will be required, and that
packets sent between the Switch and a remote SNMP manger will
40