D-Link TM DES-6500 Cli Manual page 175

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#show authen server_group
Command: show authen server_group
Group Name
---------------
radius
Darren
tacacs
tacacs+
xtacacs
Total Entries : 4
DES-6500:4#
config authen parameter response_timeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the response timeout for 60 seconds:
DES-6500:4# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DES-6500:4#
Example usage:
To configure the response timeout to never time out:
DES-6500:4# config authen parameter response_timeout 0
Command: config authen parameter response_timeout 0
Success.
DES-6500:4#
IP Address
---------------
----------------------------------------
10.53.13.2
10.53.13.94
----------------------------------------
----------------------------------------
Used to configure the amount of time the Switch will wait for a user
to enter authentication before timing out.
config authen parameter response_timeout <int 0-255>
This command will set the time the Switch will wait for a response of
authentication from the user.
response_timeout <int 0-255> - Set the time, in seconds, the Switch
will wait for a response of authentication from the user attempting to
log in from the command line interface or telnet interface. An entry of
0 will denote that the Switch will never time out while waiting for a
response of authentication. The default setting is 30 seconds.
Only administrator-level users can issue this command.
Protocol
--------
TACACS
TACACS
172