D-Link TM DES-6500 Cli Manual page 134

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show link_aggregation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current Link Aggregation configuration:
DES-6500:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID
Master Port
Member Port
Active Port:
Status
Flooding Port
DES-6500:4
Used to display the current link aggregation configuration on the
Switch.
show link_aggregation {group_id <value 1-32> | algorithm}
This command will display the current link aggregation configuration
of the Switch.
<value 1-32> − Specifies the group ID. The Switch allows up to 32
link aggregation groups to be configured. The group number
identifies each of the groups.
algorithm − Specify to view the algorithm employed of this link
aggregation group.
None.
: 1
: 2:17
: 1:5-1:10,2:17
: Disabled
: 1:5
131