D-Link TM DES-6500 Cli Manual page 161

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DES-6500:4#
delete authen_login method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the method list name "Trinity":
DES-6500:4#delete authen_login method_list_name Trinity
Command: delete authen_login method_list_name Trinity
Success.
DES-6500:4#
show authen_login
Purpose
Syntax
Description
Used to delete a previously configured user defined method list of
authentication methods for users logging on to the Switch.
delete authen_login method_list_name <string 15>
This command is used to delete a list for authentication methods for
user login.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the given method list to delete.
Only administrator-level users can issue this command.
Used to display a previously configured user defined method list of
authentication methods for users logging on to the Switch.
show authen_login [default | method_list_name <string 15> | all]
This command is used to show a list of authentication methods for
user login. The window will display the following parameters:
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will
be queried for authentication when a user attempts to log on
to the Switch. Priority ranges from 1 (highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemented, per method list name.
Comment – Defines the type of Method. User-defined Group
refers to server group defined by the user. Built-in Group
refers to the TACACS, XTACACS, TACACS+ and RADIUS
158