D-Link TM DES-6500 Cli Manual page 41

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To create the SNMP community string "dlink:"
DES-6500:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DES-6500:4#
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink:"
DES-6500:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-6500:4#
show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Used to remove a specific SNMP community string from the
Switch.
delete snmp community <community_string 32>
The delete snmp community command is used to remove a
previously defined SNMP community string from the Switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch's SNMP
agent.
Only administrator-level users can issue this command.
Used to display SNMP community strings configured on the
Switch.
show snmp community {<community_string 32>}
The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch's SNMP
agent.
None.
38