D-Link TM DES-6500 Cli Manual page 42

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To display the currently entered SNMP community strings:
DES-6500:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
------------------------------
dlink
private
public
Total Entries: 3
DES-6500:4#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"
DES-6500:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-6500:4#
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
View Name
------------------------------ ------------
ReadView
CommunityView
CommunityView
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID>
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
<snmp_engineID> − An alphanumeric string that will be used to
identify the SNMP engine on the Switch.
Only administrator-level users can issue this command.
Used to display the identification of the SNMP engine on the
Switch.
show snmp engineID
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.
None.
None.
39
Access Right
read_write
read_write
read_only