D-Link TM DES-6500 Cli Manual page 44

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create snmp group
Restrictions
Example usage:
To create an SNMP group named "sg1:"
DES-6500:4#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DES-6500:4#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
be encrypted.
read_view – Specifies that the SNMP group being created can
request SNMP messages.
write_view – Specifies that the SNMP group being created has
write privileges.
<view_name 32> − An alphanumeric string of up to 32 characters
that is used to identify the group of MIB objects that a remote
SNMP manager is allowed to access on the Switch.
notify_view − Specifies that the SNMP group being created can
receive SNMP trap messages generated by the Switch's SNMP
agent.
Only administrator-level users can issue this command.
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group to be deleted.
Only administrator-level users can issue this command.
DES-6500:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-6500:4#
41