D-Link TM DES-6500 Cli Manual page 77

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show system_severity
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the system severity settings currently implemented on the Switch:
DES-6500:4#config system_severity trap critical
Command: config system_severity trap critical
Success.
DES-6500:4#
To display the current severity settings set on the Switch.
show system_severity
This command is used to view the severity settings that have been
implemented on the Switch using the config system_severity
command.
None.
None.
DES-6500:4#show system_severity
Command: show system_severity
system_severity log
system_severity trap
DES-6500:4#
: information
: critical
74