D-Link TM DES-6500 Cli Manual page 63

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To display the errors of the port 3 of module 1:
DES-6500:4#show errors ports 1:3
Command: show errors ports 1:3
CRC Error
Undersize
Oversize
Fragment
Jabber
Drop Pkts
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current CPU utilization:
DES-6500:4#show utilization cpu
Command: show utilization cpu
CPU utilization :
-------------------------------------------------------------------------------
Five seconds - 15%
DES-6500:4#
To display the port utilization statistics:
RX Frames
---------------
19 Excessive Deferral
0 CRC Error
0 Late Collision
0 Excessive Collision
11 Single Collision
20837 Collision
Used to display real-time port and cpu utilization statistics.
show utilization [ports | cpu]
This command will display the real-time port and cpu utilization
statistics for the Switch.
cpu – Entering this parameter will display the current cpu
utilization of the Switch, as a percentage.
ports – Entering this parameter will display the current utilization of
all ports on the Switch.
None.
One minute - 25%
60
TX Frames
----------------
0
0
0
0
0
0
Five minutes - 14%