D-Link TM DES-6500 Cli Manual page 89

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp ports 1 through 9 on switch one:
DES-6500:4#show stp ports 1:1-1:9
Command: show stp ports 1:1-1:9
MSTP Port Information
----------------------
Port Index
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes
Msti Designated Bridge
----- ------------------
0 8000/0050BA7120D6
1 8001/0053131A3324
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose
Syntax
Description
Parameters
Max Age
TX Hold Count
Forwarding BPDU
Loopback Detection
LBD Recover Time
DES-6500:4#
Used to display the Switch's current instance_id configuration.
show stp ports <portlist>
This command displays the STP Instance Settings and STP
Instance Operational Status currently implemented on the Switch.
<portlist> − Specifies a range of ports to be displayed. The port
list is specified by listing the lowest slot number and the beginning
port number on that slot, separated by a colon. Then the highest
slot number, and the highest port number of the range (also
separated by a colon) are specified. The beginning and end of the
port list range are separated by a dash. For example, 1:3
specifies slot number 1, port 3. 2:4 specifies slot number 2, port
4. 1:3-2:4 specifies all of the ports between slot 1, port 3 and slot
2, port 4 − in numerical order.
None.
: 1:1 , Hello Time: 2 /2 ,
Internal PathCost Prio
-----------------
200000
200000
Used to display the Switch's STP instance configuration
show stp instance_id <value 0-15>
This command displays the Switch's current STP Instance
Settings and the STP Instance Operational Status.
<value 0-15> - Enter a value defining the previously configured
instance_id on the Switch. An entry of 0 will display the STP
: 20
: 3
: Enabled
: Enabled
: 60
Port STP enabled , LBD: No
Status
---- ----------
128 Forwarding
128 Forwarding
86
Role
----------
Root
Master