D-Link TM DES-6500 Cli Manual page 152

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show igmp_snooping
Parameters
Restrictions
Example usage:
To show igmp snooping:
DES-6500:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State
Multicast router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Total Entries: 2
DES-6500:4#
show igmp_snooping group
Purpose
Syntax
Description
Parameters
Restrictions
<vlan_name 32> − The name of the VLAN for which to view the
IGMP snooping configuration.
None.
: Disabled
: Disabled
: default
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: vlan2
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
Used to display the current IGMP snooping group configuration on
the Switch.
show igmp_snooping group {vlan <vlan_name 32>}
This command will display the current IGMP snooping group
configuration on the Switch.
vlan <vlan_name 32> − The name of the VLAN for which to view
IGMP snooping group configuration information.
None.
149