D-Link TM DES-6500 Cli Manual page 210

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To display the current authentication session statistics for port 16:
DES-6500:4#show auth_session_statistics ports 1:16
Command: show auth_session_statistics ports 1:16
Port number : 1:16
SessionOctetsRx
SessionOctetsTx
SessionFramesRx
SessionFramesTx
SessionId
SessionAuthenticMethod
SessionTime
SessionTerminateCause
SessionUserName
CTRL+C ESC q
show auth_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication statistics for port 16 of module 1:
0
0
0
0
Remote Authentication Server
0
SupplicantLogoff
Trinity
Quit SPACE n Next Page
Used to display the current authentication statistics.
show auth_statistics {ports <portlist> | all]}
The show auth_statistics command is used to display the
current authentication statistics of the Switch on a per port basis.
ports <portlist> − Specifies a range of ports. The port list is
specified by listing the lowest slot number and the beginning port
number on that slot, separated by a colon. Then the highest slot
number, and the highest port number of the range (also
separated by a colon) are specified. The beginning and end of the
port list range are separated by a dash. For example, 1:3
specifies slot number 1, port 3. 2:4 specifies slot number 2, port
4. 1:3-2:4 specifies all of the ports between slot 1, port 3 and slot
2, port 4 − in numerical order.
all – Specifies that all ports will be viewed.
None.
207
Enter Next Entry a All