D-Link TM DES-6500 Cli Manual page 128

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DES-6500:4#show vlan
Command: show vlan
VID
VLAN TYPE
UserDefinedPid
Encap
Member ports
Static ports
Untagged ports
Forbidden ports :
VID
VLAN TYPE
UserDefinedPid
Encap
Member ports
Static ports
Untagged ports
Forbidden ports :
Total Entries : 2
DES-6500:4#
Used to display the current VLAN configuration on the Switch.
show vlan {<vlan_name 32>}
This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member/Forbidden status of each port that is
a member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which to
display a summary of settings.
None.
: 1
: 1QVLAN
:
:
: 1:1-1:24,2:1-2:24
: 1:1-1:24,2:1-2:24
: 1:1-1:24,2:1-2:24
: 2
: PROTOCOL
:
:
: 1:1-1:24,2:1-2:24
: 1:24,2:24
:
125
VLAN Name : default
Protocol ID :
Advertisement : Enabled
VLAN Name : v1
Protocol ID : ip
Advertisement : Disabled