D-Link TM DES-6500 Cli Manual page 226

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create access_profile (ipv6)
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an access profile based on IPv6 classification:
DES-6500:4# create access_profile ipv6 class flowlabel profile_id 4
Command: create access_profile ipv6 class flowlabel profile_id 4
Success.
DES-6500:4#
Used to create an access profile on the Switch by examining the
IPv6 part of the packet header. Masks can be entered that will be
combined with the values the Switch finds in the specified frame
header fields. Specific values for the rules are entered using the
config access_profile command, below.
create access_profile ipv6 profile_id <value 1-8> {class |
flowlabel | source_ipv6_mask <ipv6mask> |
destination_ipv6_mask <ipv6mask>}]
This command is used to identify various parts of IPv6 packets that
enter the Switch so they can be either forwarded or filtered.
profile_id <value 1-8> - Specifies an index number between 1 and 8
that will identify the access profile being created with this command.
ipv6 – Denotes that IPv6 packets will be examined by the Switch for
forwarding or filtering based on the rules configured in the config
access_profile command for IPv6. IPv6 packets may be identified
by the following:
class – Entering this parameter will instruct the Switch to
•
examine the class field of the IPv6 header. This class field is a
part of the packet header that is similar to the Type of Service
(ToS) or Precedence bits field in IPv4.
flowlabel – Entering this parameter will instruct the Switch to
•
examine the flow label field of the IPv6 header. This flow label
field is used by a source to label sequences of packets such as
non-default quality of service or real time service packets.
source_ipv6_mask <ipv6mask> - Specifies an IP address
•
mask for the source IPv6 address.
destination_ipv6_mask <ipv6mask> - Specifies an IP address
•
mask for the destination IPv6 address.
Only administrator-level users can issue this command.
223