D-Link TM DES-6500 Cli Manual page 131

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#create link_aggregation group_id 1
Command: create link_aggregation group_id 1
Success.
DES-6500:4#
delete link_aggregation group_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete link aggregation group:
DES-6500:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-6500:4#
config link_aggregation
Purpose
Syntax
Description
Used to delete a previously configured link aggregation group.
delete link_aggregation group_id <value 1-32>
This command is used to delete a previously configured link
aggregation group.
<value 1-32> − Specifies the group ID. The Switch allows up to 32
link aggregation groups to be configured. The group number
identifies each of the groups.
Only administrator-level users can issue this command.
Used to configure a previously created link aggregation group.
config link_aggregation group_id <value 1-32> {master_port
<port> | ports <portlist> | state [enabled | disabled]
This command allows the configuration of a link aggregation group that
was created with the create link_aggregation command above.
128