D-Link TM DES-6500 Cli Manual page 321

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To display the current OSPF interface settings, for a specific OSPF interface:
DES-6500:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: ipif2
Network Medium Type: BROADCAST
Area ID: 1.0.0.0
Priority: 1
DR Address: 123.234.12.34
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Total Entries: 1
DES-6500:4#
show ospf all
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the current OSPF interface settings, for all OSPF interfaces on the Switch:
DES-6500:4#show ospf all
Command: show ospf all
Interface Name: System
Network Medium Type: BROADCAST
Area ID: 0.0.0.0
Priority: 1
DR Address: 10.42.73.10
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Interface Name: ipif2
Network Medium Type: BROADCAST
Area ID: 1.0.0.0
Priority: 1
DR Address: 123.234.12.34
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Total Entries: 2
DES-6500:4#
IP Address: 123.234.12.34/24 ((Link Up)
Metric: 1
Administrative State: Enabled
DR State: DR
Backup DR Address: None
Dead Interval: 40
Retransmit Time: 5
Used to display the current OSPF settings of all the OSPF
interfaces on the Switch.
show ospf all
This command will display the current OSPF settings for all OSPF
interfaces on the Switch.
None.
None.
IP Address: 10.42.73.10/8 (Link Up)
Metric: 1
Administrative State: Enabled
DR State: DR
Backup DR Address: None
Dead Interval: 40
Retransmit Time: 5
IP Address: 123.234.12.34/24 ((Link Up)
Metric: 1
Administrative State: Enabled
DR State: DR
Backup DR Address: None
Dead Interval: 40
Retransmit Time: 5
318