D-Link TM DES-6500 Cli Manual page 45

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DES-6500:4#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group
Used to display the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of
each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
Name : Group3
: ReadView
: WriteView
: NotifyView
: SNMPv3
: NoAuthNoPriv
Name : Group4
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authNoPriv
Name : Group5
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authNoPriv
Name : Group6
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authPriv
Name : Group7
: ReadView
: WriteView
: NotifyView
: SNMPv3
: authPriv
Name : initial
42