D-Link TM DES-6500 Cli Manual page 197

Modular layer 3 chassis ethernet switch
Hide thumbs Also See for TM DES-6500:
Table of Contents

Advertisement

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show 802.1x auth_configuration
Parameters
Restrictions
Example usage:
To display the 802.1x authentication states (stacking disabled):
DES-6500:4#show 802.1x auth_configuration ports 1:1
Command: show 802.1x auth_configuration ports 1:1
802.1X
Authentication Mode
Authentication Protocol : Radius_EAP
Port number
Capability
AdminCrlDir
OpenCrlDir
Port Control
QuietPeriod
TxPeriod
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuthenticate
CTRL+C ESC q
forces the Authenticator of the port to become Authorized.
ForceUnauth forces the port to become Unauthorized.
QuietPeriod − Shows the time interval between authentication failure
and the start of a new authentication attempt.
TxPeriod − Shows the time to wait for a response from a supplicant
(user) to send EAP Request/Identity packets.
SuppTimeout − Shows the time to wait for a response from a
supplicant (user) for all EAP packets, except for the Request/Identity
packets.
ServerTimeout − Shows the length of time to wait for a response from
a RADIUS server.
MaxReq − Shows the maximum number of times to retry sending
packets to the supplicant.
ReAuthPeriod − Shows the time interval between successive re-
authentications.
ReAuthenticate: Enabled/Disabled − Shows whether or not to re-
authenticate.
ports <portlist> − Specifies a range of ports. The port list is specified
by listing the lowest slot number and the beginning port number on
that slot, separated by a colon. Then the highest slot number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated
by a dash. For example, 1:3 specifies slot number 1, port 3. 2:4
specifies slot number 2, port 4. 1:3-2:4 specifies all of the ports
between slot 1, port 3 and slot 2, port 4 − in numerical order.
all – denotes all ports on the Switch.
Only administrator-level users can issue this command.
: Enabled
: Port_based
: 1:1
: None
: Both
: Both
: Auto
: 60
sec
: 30
sec
: 30
sec
: 30
sec
: 2
times
: 3600 sec
: Disabled
Quit
SPACE n
Next Page
194
Enter
Next Entry
a
All

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack des-6500

Table of Contents