D-Link TM DES-6500 Cli Manual page 65

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#show stack_information
Command: show stack_information
Box
ID Type
--- -----------
1 DES-6507
2 USR-NOT-CFG
3 USR-NOT-CFG
4 USR-NOT-CFG
5 USR-NOT-CFG
6 USR-NOT-CFG
7 USR-NOT-CFG
8 USR-NOT-CFG
--------------------------------------------------------------------------------------------------
Topology
Current state :MASTER
Box Count
DES-6500:4#
clear counters
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the counters:
Exist
-----
exist
no
no
no
no
no
no
no
:STAR
:1
Used to clear the Switch's statistics counters.
clear counters {ports <portlist>}
This command will clear the counters used by the Switch to compile
statistics.
ports <portlist> − Specifies a range of ports to be displayed. The
port list is specified by listing the lowest slot number and the
beginning port number on that slot, separated by a colon. Then the
highest slot number, and the highest port number of the range (also
separated by a colon) are specified. The beginning and end of the
port list range are separated by a dash. For example, 1:3 specifies
slot number 1, port 3. 2:4 specifies slot number 2, port 4. 1:3-2:4
specifies all of the ports between slot 1, port 3 and slot 2, port 4 − in
numerical order.
Only administrator-level users can issue this command.
DES-6500:4#clear counters ports 2:7-2:9
Command: clear counters ports 2:7-2:9
Success.
DES-6500:4#
Prio- Prom Runtime
rity version version
----- -------- --------
16 2.00-B20 3.00-B29
62
H/W
version
--------
1A1