D-Link TM DES-6500 Cli Manual page 59

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
When autoconfig is enabled and the Switch is rebooted, the normal login screen will appear for a few moments while the
autoconfig request (i.e. download configuration) is initiated. The console will then display the configuration parameters as they
are loaded from the configuration file specified in the DHCP or TFTP server. This is exactly the same as using a download
configuration command. After the entire Switch configuration is loaded, the Switch will automatically "logout" the server. The
configuration settings will be saved automatically and become the active configuration.
Upon booting up the autoconfig process is initiated, the console screen will appear similar to the example below. The
configuration settings will be loaded in normal order.
Example usage:
To enable autoconfiguration on the Switch:
DES-6500:4#enable autoconfig
Command: enable autoconfig
Success.
DES-6500:4#
Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.
DES-6500:4#
DES-6500:4#
DES-6500:4#download configuration 10.41.44.44 c:\cfg\setting.txt
Command: download configuration 10.41.44.44 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process including the logout appears like this:
DES-6500:4#disable authen_policy
Command: disable authen_policy
Success.
DES-6500:4#
DES-6500:4##-------------------------------------------------------------------
DES-6500:4##
DES-6500:4#
**********
* Logout *
**********
NOTE: Dual-purpose (DHCP/TFTP) server utility software may require entry of the
configuration file name and path within the user interface. Alternatively, the DHCP
software may require creating a separate ext file with the configuration file name
and path in a specific directory on the server. Consult the documentation for the
DCHP server software if you are unsure.
DES-6500 Chassis Ethernet Switch
Command Line Interface
Firmware: Build 3.00-B29
End of configuration file for DES-6500
56