Table of Contents
Advertisement
4.2.1
Configure/View Host Adapter Settings Menu
The Configure/View Host Adapter Settings menu lists three settings under SCSI
Bus Interface Definitions and three additional options, as shown in Figure 4-2:
•
Host Adapter SCSI ID: changes the host controller SCSI ID from its default
value of 7
•
SCSI Parity Checking: enables or disables host controller SCSI parity
checking
•
Host Adapter SCSI Termination: configures host controller SCSI termination
Advanced users can access Boot Device Options, SCSI Device Configuration, and
Advanced Configuration Options through this menu.
Adaptec AIC7880 Ultra/Ultra W
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID ...................................7
SCSI Parity Checking....................................Enabled
Host Adapter SCSI Termination ....................Low OFF/High ON
Additional Options
Boot Device Options......................................Press <Enter>
SCSI Device Configuration............................Press <Enter>
Advanced Configuration Options...................Press <Enter>
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 4-2 Configure/View Host Adapter Settings Screen
SCSISelect (TM)
AIC-7880 Ultra/Ultra W at Bus:Device 00:10h
<F6> - Reset to Host Adapter Defaults
Chapter 4 - SCSISelect Configuration Utility 4-5
Utility v1.2
*
=default)
Advertisement
Table of Contents
