Measurement Control/Measurement Value Acquisition; Commands - Omron ZG User Manual

Measurement Control/Measurement Value
Acquisition Commands
Acquire Measurement Value <MEASURE command >
This command acquires the current measurement value.
< Command format >
M E A S U R E
< Response format >
When processing ends successfully
• When tasks 1 to 8 are specified individually
C R
O K
• When all tasks are specified
Measurement value of task 1 Measurement value of task 2
C R
O K
When a measurement error occurs
- 9 9 9 . 9 9 9 9 9
When processing fails
C R
E R
< Explanation of parameters >
Task No.
Measurement value
136
Serial Communication
C R
Task No.
C R
Measurement
value
,
C R
Specifies the task No. (1 to 8)
"0" specifies all tasks. The default value is task 1.
The acquired measurement value is returned.
or
C R
M
Configuration of measurement
value data p.132
,
Task No.
,
C R
Measurement value of task 8
ZG User's Manual