Omron ZG User Manual page 139

Issue Measurement Trigger < TRIG command >
This command issues the measurement trigger.
No parameters are provided for this command.
< Command format >
or
C R
T R I G
< Response format >
When processing ends successfully (measurement is completed)
C R
O K
When processing fails
C R
E R
Note
After measurement is completed, acquire measurement values by the MEASURE command.
Important
This command functions only when trigger measurement is enabled. It cannot be used in the
case of AUTO sensitivity. (If it is executed, ER is returned.)
ZG User's Manual
T C R
Serial Communication
137