Measurement Control Conditions - Omron ZFX-C10 User Manual

Measurement Control Conditions

Set and change measurement processing-related functions.
Measurement Image Save Conditions
Sets the conditions for saving measurement images.
Note
Saving measurement images
Up to 100 images can be saved. When the number of saved images exceeds 100, new images are saved by over-
writing the oldest image. When the Controller is turned OFF, images saved on the Controller are cleared.
Saved images only can also be cleared without turning the Controller OFF.
p.123
MENU mode - [System] - [Measure] - [Image storage]
Setting value Description
None Measurement images are not saved. (default value)
Only NG Measurement images are saved only when the measurement result is NG.
All All measurement images are saved regardless of the measurement result.
Saved Image Delete Conditions
Sets the conditions for clearing saved images.
MENU mode - [System] - [Measure] - [Image deletion]
Setting value Description
At bank switch Clears saved image at bank switching. (default value)
OFF Disables clearing of saved image at bank switching.
ZFX-C User's Manual
121
System Settings