Checking/Adjusting The Measurement Status; Adj Mode; Checking Measurement Status - Omron ZG User Manual

Checking/Adjusting the Measurement Status

Checking Measurement Status

Display the profile on the LCD screen while performing continuous measurement.
Profile monitor
HEIGHT1 BIT1
MENU/
109.05210mm
LV: 1-320
Profile monitor
Measurement item
Bank No.
Task No.
HEIGHT1 BIT1
Profile
Measurement result
109.05210mm
Sensitivity level
LV: 1-320
ZG User's Manual
Output condition setup monitor
HEIGHT1 BIT1
VIEW
1JUDGE 2ZERO
3FILTER 4ERROR
Checking/Adjusting the Measurement Status - ADJ Mode
The current profile is displayed in the
Through mode. When multiple tasks are
registered, switch the profile and display it
for each individual task.
Note
To switch the task display, use the ↑UP key/
↓DOWN key.

- ADJ Mode

49