Setting correction ON/OFF
Set Sensor inclination correction ON/OFF.
FUN mode-[SYSTEM]-[SENSOR SET]-[CORECT]-[CORECT]
Setting value
OFF
ON
102
System Settings
SYS/INC.
POINT2 START
[128]LINE SET
SYS/INC.
POINT2
SELECT
1AVE 2PEAK
3BTM
SYS/INC.
SET
Description
Sensor inclination correction is not performed. (default value)
Sensor inclination correction is performed.
6
Specify the start and end lines for
point 2.
Left/Right key: Moves the cursor.
SET Key: Applies the setting.
ESC Key: Cancels the setting.
7
Select the measurement point.
8
Press the SET key to apply the
setting.
ZG User's Manual