Shortcut Keys - Omron ZG User Manual

Shortcut Keys

Function keys
F1
F2
F3
F4
ZG User's Manual
Function Keys
Function
If the F1 key is pressed when [I/O]-[I/O LINE]-[TRIGGER]-
[ENABLE] is set, the trigger is input.
The image is displayed. To return the display to the normal display,
press the F2 key again.
Measurement is stopped while the image is displayed.
HEIGHT1 BIT1
11.975mm
LV: 1-320
Magnifies the profile display.
Magnifying the Profile Display p.57
Functions/Operations Used during Operation - RUN Mode
In the RUN mode, the following functions
are assigned to shortcut keys F1 to F4.
When the F3 key is pressed
and held down for 3 seconds
or longer, the key lock
confirmation message is
displayed. When the key lock
function is ON, the FUN/ADJ/
RUN modes cannot be
Lock status
switched.
To cancel the key lock, press
and hold down the F3 key for
3 seconds or longer.
55