Table of Contents
Advertisement
External input of bank switching signal
Bank switching signal
ENABLE signal
T1:
ENABLE signal OFF
response time
T2:
Bank switching time
External input of laser stop signal
Laser stop signal
Laser beam emission
ENABLE signal
T1:
Laser stop response time
T2:
Laser restore response
time
T3:
ENABLE signal OFF
response time
T4:
ENABLE signal ON
response time
124
I/O Timing Charts
ON
OFF
T1
OFF
ON
This is the time after input of the back switching signal until the
ENABLE signal turns OFF.
When the ECO monitor (display OFF) is operating: 20 ms or less
When the digital monitor is operating: 300 ms or less
When the profile monitor is operating: 200 ms or less
This is the time in which bank switching is executed.
When the ECO monitor (display OFF) is operating: 200 ms or less
When the digital monitor is operating: 500 ms or less
When the profile monitor is operating: 400 ms or less
ON
OFF
ON
T1
OFF
OFF
T3
ON
This is the time after the laser stop signal is input until laser
emission is stopped. 30 ms or less
This is the time after the laser stop signal is canceled until laser
emission is started. 20 ms or less
This is the time after input of the laser stop signal until the ENABLE
signal turns ON. 10 ms or less
This is the time after cancellation of the laser stop signal until the
ENABLE signal turns ON. 5 ms or less
T2
T2
T4
ZG User's Manual
Advertisement
Table of Contents
