Omron ZG User Manual page 22

Operation Panel
Name
(1) Control keys
(2) Mode switch
(3) Menu switch
Connectors
Name
(1) Sensor connector
(2) Function extension
connector
(3) USB port
(4) RS-232C connector
(5) Voltage/Current
switch
(6) I/O cable
20
ZG Series
Function
These keys are used for setting measurement conditions or
switching the display.
List of Key Operations p.182
This switch selects the operation mode.
FUN : Select this mode when setting measurement conditions.
ADJ : Select this mode when adjusting the judgment threshold
value.
RUN : Select this mode when performing measurement.
Measurement results and judgment results are output only when
the RUN mode is currently selected.
This switch selects the setup menu.
STD : Standard menu. Select this when setting the minimum
required items for measurement.
EXP : Expert menu. Select this item when making a more detailed
setup.
Function
This connector connects the Sensor.
Not used. Leave the cover (supplied) attached to this connector.
Connect the USB cable (MINI-B) to the USB port to connect to a
personal computer.
Connect the RS-232C cable (exclusive product) when you are
connecting the Controller to a PLC, programmable terminal or
personal computer.
RS-232C cable p.17
This switch is for selecting voltage output or current output as the
analog output. (default value: voltage output)
Important
Before operating this switch, make sure that the Controller is turned
OFF.
The I/O cable connects the Controller to the power supply and
external devices, such as timing sensors or programmable
controllers.
ZG User's Manual