Connector Terminals With Transistors; Node Address, Baud Rate, And Output Hold/Clear Settings - Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual

Connector Terminals with Transistors

Wiring I/O
5-6 Connector Terminals with Transistors
5-6-1

Node Address, Baud Rate, and Output Hold/Clear Settings

144
Example:
I/O power supply for a DRT2-ID16 Remote I/O Terminal.
MS NS NODE ADDRESS
5 5
X10 X1
DRT2-ID16
REMOTE TERMINAL
Refer to the wiring details for the Slave for information on the terminal
arrangement at the terminal block and external I/O wiring.
Example:
Wiring to input 0 on a DRT2-ID16 Remote I/O Terminal.
MS NS NODE ADDRESS
5 5
X10
DRT2-ID16
REMOTE TERMINAL
These parameters are set in the same way as for Remote I/O Terminals with
Transistors. Refer to 5-5-1 Node Address, Baud Rate, and Output Hold/Clear
Settings.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
IN
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
IN
X1
Section 5-6