Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 396

Analog Output Terminals
Setting Using the DeviceNet Configurator
1,2,3... 1. Double-click the icon of the Analog Slave to be set in the Main Window and
open the Edit Device Parameters Window. (From the Maintenance Mode
Window, click the right mouse button over the Slave icon and select Pa-
rameters and Edit.)
2. Select the Tab Page for the output where the cumulated counter is to be
set, and select Cumulated Count under the Function Choice heading.
3. To set the counter unit, click the Cumulated Count Tab and select Hour
or Minute from the pull-down menu in the Cumulated Timer field.
Section 7-5
375