Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 580

Connectable Devices
Note The Power Supply Sharing Taps are sold through the OMRON 24 Service Co., Ltd.
Connectors for I/O Power Cables to Environment-resistive Slave
Output Terminals
DRT2-OD08C(-1)
Model
XS4W-D421-1@@-A Cable with connectors on both ends (socket and plug)
XS4F-D421-1@@-A Cable with connector on one end (female socket)
XS4H-D421-1@@-A Cable with connector on one end (male plug)
Always use DeviceNet Communications Connectors that conform to DeviceNet Connector standards.
T-joints
Model
XS4R-D424-5 Shielded T-joint
Use to branch an I/O power supply cable for an Environment-resistive
Slave.
Y-joint Plugs and Sockets
Model
XS2R-D426-@11-F With cable
XS2R-D426-1 Without cable
Connector Covers for Environment-resistive Slaves
Model
XS2Z-12 Waterproof Cover (meets IP67 standards)
XS2Z-15 Dust Cover
MIL Cables for Connector Terminals
Cables with Connectors on Both Ends (40-pin
Model
G79-I@C
G79-O@C
Specifications
Specifications
Specifications
Specifications
Applicable Slave
DRT2-ID16ML
DRT2-OD16ML-1
DRT2-OD16ML
DRT2-OD16ML-1
Use for Environment-resistive Slaves with
16 inputs or 16 outputs. (Branches a single
connector's signals into two connectors.)
×
1 and 20-pin
Applicable Relay Terminal
G7TC-ID16/IA16
G7TC-OC16-1
G7TC-OC16/OC08
G70D-SOC16/VSOC16
G70DFOM16/VFOM16
G70A-ZOC16-3
G70D-SOC08
G70R-SOC08
G70D-SOC16-1
G70D-FOM16-1
G70A-ZOC16-4
Appendix D
Manufacturer
OMRON
Manufacturer
OMRON
Manufacturer
OMRON
Manufacturer
OMRON
×
2)
Manufacturer
OMRON
559