Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 182

Connector Terminals with Transistors
Components of the DRT2-ID32ML and DRT2-ID32ML-1
Input Indicators
Item
Max. simultaneously ON
input points
Number of circuits
Note All 32 inputs can be ON simultaneously if the Remote I/O Terminal is mounted
facing up, but sufficient space will need to be allowed between Units depend-
ing on the ambient temperature. Refer to the Dimensions diagram on
page 165 for details.
Top panel
(×10)
(×1)
Rotary switches
Set the node address.
Name
I0 to I15
II0 to II15
Note "m" is the first word allocated to the Remote Input Terminal.
32 points (See note.)
32 points with one common
DeviceNet indicators
Indicate the status of the Slave, communications,
and inputs (lit when input is ON).
Front panel
2
DIN track
mounting hooks
Communications
connector
Input connector (MIL)
Connects the 32 inputs via a MIL connector.
The MIL cable is sold separately.
Indicate the status of bits (contacts) 0 to 15 in word m. Lit
when input is ON; not lit when input is OFF.
Indicate the status of bits (contacts) 0 to 15 in word m+1. Lit
when input is ON; not lit when input is OFF.
Section 5-6
Specification
Bottom panel
Meaning
161