Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 79

Common Slave Functions
Setting Method 2
1,2,3...
58
4. Double-click the I/O Comment field for the connected device that is to be
assigned a name (comment). The following window will be displayed. En-
ter the desired name and click the OK Button.
5. Select the General Tab, click the Download Button, and then click the Re-
set Button to reset the Unit.
6. Click the OK Button.
The procedure for this setting method is the same from both the Main Window
and the Maintenance Mode Window.
1. Turn ON the power to the DRT2-series Smart Slave.
2. Double-click or click the right mouse button over the icon of the DRT2-se-
ries Smart Slave to be set in the Network Configuration Window, and select
Edit I/O Comment.
3. The following type of window will be displayed. Select the terminal which
is to have a name (comment) assigned.
Section 4-2