Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 175

Connector Terminals with Transistors
Components of the DRT2-ID16ML(X) and DRT2-ID16ML(X)-1
Input Indicators
Internal Circuits
DRT2-ID16ML(X) (NPN)
154
Top panel
(×10)
(×1)
Rotary switches
Set the node address.
Cable with Connectors (MLX Models Only)
Green
Name
0 to 15
Note "m" is the first word allocated to the Remote Input Terminal.
V+
CAN_H
Physical
DRAIN layer
CAN_L
V−
DeviceNet indicators and Input Indicators
Indicate the status of the Slave, communications,
and each input (lit when input is ON).
Front panel
2
DIN track
mounting hooks
Communications
connector
Input connector (MIL)
Connects the 16 inputs via a MIL connector.
A cable (10 cm) with only an MLX connector
is included.
Indicate the status of bits (contacts) 0 to 15 in word m. Lit
when input is ON; not lit when input is OFF.
Photo-
coupler
DC-DC
converter
(non-
isolated)
Photo-
coupler
Section 5-6
Bottom panel
Meaning
V
Input
G
Input