Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 333

Maintenance Information Window
Individual Temperature Input Windows
Display Area
312
Item
Unit Error ON when a Unit Error has occurred in an Analog Unit.
Cold junction Com- ON when there is an error in the cold junction compensator.
pensator error
(DRT2-TS04T only)
Item
Input Type
Shows the present input sensor type. (DRT2-TS04
Display Mode
Indicates the number of digits displayed. (DRT2-TS04
0000: No decimal point
0000.0: Decimal point and significant digits to 0.1
0000.0: Decimal point and significant digits to 0.01
I/O Comment Displays up to 32 characters of text as a comment. A separate
comment can be set for each input.
Last Maintenance Displays the last maintenance date that was set. (All models.)
Date
Present Value Displays the present analog value. (All models.)
Displays values derived from the analog value, including the
Peak, Bottom, Top, and Valley values, and Rate-of-change
(DRT2-AD04
Total Time and Top/Valley Count (DRT2-TS04
Cumulated Count. For details, refer to each function's expla-
nation and settings.
Description
Status check boxes
(Status flags)
Description
@ @
and DRT2-TS04 ), the Temperature Range
Section 7-3
@
only)
@
only)
@
only), and the