Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 102

Functions of General-purpose Slaves and Environment-resistive Slaves
Manual Recovery Mode
Setting Using the
DeviceNet
Configurator
1,2,3...
Recovery occurs when the wiring is corrected and the I/O power supply is
turned back ON.
I/O Indicator Status when Disconnection is Detected
0 to 15
Flashing
red.
The method used to set values from the DeviceNet Configurator (Ver. 2.20 or
later) is described here.
1. Turn ON the power to the DRT2-series Smart Slave.
2. From the Main Window, open the Network Configuration Window and dou-
ble-click or click the right mouse button over the icon of the DRT2-series
Smart Slave to be set. Select Parameter and Edit to display the Edit De-
vice Parameters Window.
From the Maintenance Mode Window, click the right mouse button over the
icon of the DRT2-series Smart Slave to be set. Select Parameter and Edit
to display the Edit Device Parameters Window.
3. Select the IN Tab.
Section 4-3
81