Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 159

Remote I/O Terminals with Transistors
DRT2-OD16TA-1 (PNP)
Dimensions: DRT2-OD16TA and DRT2-OD16TA-1
DRT2-OD16TA
REMOTE TERMINAL DC24V
Mounting holes
Two, 4.2 dia. or M4
138
Note 1. V1 is not connected internally to V2, and G1 is not connected internally to
G2. Connect them carefully.
2. When using inductive loads (such as solenoid valves), use a load with a
built-in diode to absorb reverse power or attach a diode externally.
3. Do not connect anything to the reserved terminals.
180
MS NS
170±0.2
Note The circuit section can be removed by loosening the circuit removal screws.
(Refer to Components of the DRT2-OD16TA and DRT2-OD16TA-1.)
0 1
V1 V1 V1
G1 G1 G1
−
+
Solenoid Solenoid
valve, etc. valve, etc.
OUT
7 8 9
V1 V2 V2 V2
G1 G2 G2 G2
−
+
Solenoid
valve, etc.
58
(83)
Values in parentheses are
reference values.
Section 5-5
15
V2
G2
Solenoid
valve, etc.