Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Operation Manual page 419

Temperature Input Terminals
Temperature Data 2
(Instance 114 or 118)
398
Normal Display (Instance 104)
15
1/100 Display Mode (Instance 108)
15
Temperature Data 2 is used to monitor other temperature data in addition to
that in Temperature Data 1. Select one type of following data other than that
allocated for Temperature Data 1: Temperature input value, peak value, bot-
tom value, top value, valley value, or rate of change.
Note The "Data Comparison between Channels" function, which detects tempera-
ture differences between different input channels, can be used with the values
allocated as Temperature Data 2.
The following tables show the data format used for allocating data in the Mas-
ter. Data is allocated as two's complements.
Normal Display (Instance 114)
15
Note When the DRT1-compatible 1/100 display mode is being used for 1/100 dis-
play, only 4 words (8 bytes) are occupied in the Master as well.
1/100 Display Mode (Instance 118)
15
Temperature Data 1 for Input 0
Temperature Data 1 for Input 1
Temperature Data 1 for Input 2
Temperature Data 1 for Input 3
Temperature Data 1 for Input 0
Temperature Data 1 for Input 0
Temperature Data 1 for Input 1
Temperature Data 1 for Input 1
Temperature Data 1 for Input 2
Temperature Data 1 for Input 2
Temperature Data 1 for Input 3
Temperature Data 1 for Input 3
Temperature Data 2 for Input 0
Temperature Data 2 for Input 1
Temperature Data 2 for Input 2
Temperature Data 2 for Input 3
Temperature Data 2 for Input 0
Temperature Data 2 for Input 0
Temperature Data 2 for Input 1
Temperature Data 2 for Input 1
Temperature Data 2 for Input 2
Temperature Data 2 for Input 2
Temperature Data 2 for Input 3
Temperature Data 2 for Input 3
Section 7-6
0
0
0
0