Ack Character; Nak Character - Datalogic PowerScan 950X Series Instruction Manual

ACK Character

This setting specifies an ASCII character or hex value to be used as the ACK
character. ASCII characters or any hex value from 0 to 0xFF can be selected.
See page 272
Setting to previously defined characters such as XON, XOFF, or host commands
conflicts with normal operation of these characters. 8-bit data is not recognized
when the option
Select ACK Character Setting

NAK Character

This setting specifies an ASCII character or hex value to be used as the NAK
character. ASCII characters or any hex value from 0 to 0xFF can be selected.
Setting to previously defined characters such as XON, XOFF, or host commands
conflicts with normal operation of these characters. 8-bit data is not recognized
when the option
See page 273
Select NAK Character Setting
Product Reference Guide
for more information.
Data Bits
0x06 'ACK' Character
DEFAULT
Data Bits
for more information.
0x15 'NAK' Character
DEFAULT
Enter/Exit Programming Mode
has been set as 7 Data Bits.
has been set as 7 Data Bits.
33